Sunday, November 30, 2014

SPRING Technologies to attend AEROMART Toulouse 2014



SPRING Technologies plans to participate in AEROMART Toulouse that will be held Dec 2nd until the 4th 2014.
Location:
Convention d'affaires internationale des Industries Aeronautiques et Spatiales

You can find the SPRING Technologies team at H5-B8

We look forward to seeing you there

Monday, November 24, 2014

AEROMART SUMMIT India 2014 was a huge success for SPRING Technologies



AEROMART Summit 2014 in Bangalore, India was a huge success. Above a picture of the SPRING Technologies team with Gilles Battier the CEO of SPRING Technologies


Cheers to all from the SPRING Technologies Team. Wishing everyone a great 2015.


Potential Clients and partners listening with open hearts to the presentation given by the CEO of SPRING Technologies (Gilles Battier) on NCSIMUL SOLUTIONS

Wednesday, November 19, 2014

ASCENTEC adopts NCSIMUL Machine from SPRING Technologies for its new 5-axis horizontal machining center

“High-speed manufacturing has been one of the greatest strengths of our business,” explains David Gilliat, Director of Manufacturing and Machining Technology

Ascentec Engineering was established in 2001 by a team of process and manufacturing engineerswith a solid background in electronics manufacturing processes. The founders brought with them experience in designing innovative and productivity-enhancing tools and fixtures that held up to the technology changes within the industry and gained an enviable reputation as an EMS industry leader for tooling solutions. In 2007, Ascentec began a Precision Machining division focused on providing quick-turn prototype and short-run production contract machining, along with integrated assembly services.

CHALLENGES
It’s an unhappy day indeed when a CNC machine crashes and it may take days, perhaps weeks, for the damage to be assessed and repaired. During that time, the shop staff not only loses the machine’s productive capacity but worries that it may not be possible to restore the machine to its previous ability to hold tight tolerances. It is bad enough when a vertical 3-axis CNC mill crashes, but when it happens to a 5-axis system that costs many times more, the downside is more serious. With this in mind, Ascentec Engineering began researching the market for advanced machine simulation software when it anticipated the installation of its first 5-axis horizontal machining center in 2011.
After narrowing the field to two simulation packages, the company selected NCSIMUL Machine from SPRING Technologies Inc. based on the software’s capabilities, ease of use and integration with its Mastercam CAD/CAM software from CNC

For the complete story go to: http://www.springplm.com/case_studiesbis.php?ID=655

Friday, November 14, 2014

NCSIMUL SOLUTIONS at JIMTOF 2014 - SAEILO Japan


SAEILO (SPRING Technologies Reseller) had a huge crowd around their booth while they presented NCSIMUL SOLUTIONS to their prospect clients.

For more information about SAEILO in Japan go to: http://www.saeilo.co.jp/

For more information about SPRING Technologies go to:  http://www.springplm.com









Come join SPRING Technologies at METALEX in Bangkok

  http://www.metalex.co.th/

Come and join the SPRING Technologies team at the METALEX event in Bangkok, Thailand as they will present the latest on their NCSIMUL SOLUTIONS.

Date: Nov 19 - 22, 2014

Location: BITEC, Bangkok, Thailand (Stand L01)

For more information about the event go to - http://www.metalex.co.th/

For more information about the NCSIMUL Solutions go to: http://springplm.com/

Thursday, November 6, 2014

SPRING Technologies successfully raises €5.0M to reinforce its innovative NCSIMUL SOLUTIONS offering and strengthen its international footprint


SPRING Technologies is funding a new growth stage with a new round of capital investment from its historic partner CM-CIC Capital Innovation together with ACE Management’s Aerofund III and CM-CIC Capital PrivĂ©, alongside with an Innovation loan from Bpifrance sovereign investment bank. 

This €5.0M injection will enable CEO Gilles Battier to energize the company’s development on the international scale, and speed up product innovation through disruptive R&D investments.

SPRING Technologies is funding a new growth stage with a new round of capital
investment from its historic partner CM-CIC Capital Innovation together with ACE
Management’s Aerofund III and CM-CIC Capital PrivĂ©, alongside with an Innovation
loan from Bpifrance sovereign investment bank.

This €5.0M injection will enable CEO Gilles Battier to energize the company’s
development on the international scale, and speed up product innovation through
disruptive R&D investments.

For the complete story click here


Wednesday, November 5, 2014

AEROMART SUMMIT INDIA 2014


Date: November 19th and 20th, 2014

Location: 
NICE Grounds - Bangalore
Opposite BIEC, 10th Mile, Tumkur Road Madavara Post

Agenda:


NOVEMBER 19, 2014

10.00 – 10.30 AESI presentation
Mr. P. Mueen Ahamadulla Khan, Hon.Secretary General - AESI-BB

11.00 – 11.30 UTC Aerospace Systems in India
Mr. Daniel Kumar, Director of Supply Chain - UTC AEROSPACE SYSTEMS India
Mr. Amit Pathak , Director, OE Customers & Business Development, India, Indonesia and Turkey -UTC AEROSPACE SYSTEMS – INDIA

14:30 – 15:00 Sener presentation
Mr. Sunderarajan Varadan, Director, Aerospace, SENER India Engineering & Systems

15:30 – 16:00 Mantra for Test systems : Insight on Problems & Solutions
Mr. Harshavardhan Uppalapati, Manager – Application engineering, AMETEK India


NOVEMBER 20, 2014
9:30 – 10:00 How to Secure and Optimize the transfer of your machined parts to your local
Indian production site using NCSIMUL SOLUTIONS?
Mr. Eric Lemaire, Asia-Pacific Manager - SPRING TECHNOLOGIES
The Manufacturing sector in many countries is in a state of transition. Growing in emerging economies; shrinking but becoming more productive in advanced economies. To stay afloat on a global scale, the manufacturing giants tend to increase their productivity and move up the manufacturing value chain to compete on technology and innovation.
It is a daily challenge for Manufacturers in Aerospace Industry to find the right manufacturing partners abroad and when targeted, make sure that the productivity levels, the production processes and know-how are kept agile and flexible while maintaining a high security and competitive level. In a nutshell, the goal is to Secure and Optimize the transfer of your production to your partner site as fast and easy as possible.

SPRING Technologies enables the optimal use of manufacturing companies’ CNC machines, maximizing their productivity. Production transfers and new part manufacturing launches time are dramatically reduced and kept to minimum using SPRING Technologies integrated, intelligent, instrumented Solutions. The NCSIMUL SOLUTIONS portfolio integrates the complete machining process, in real time, including cutting and tool management, post-processing, NC Simulation, technical content publishing and Real-time monitoring of the Workshop.

10:30 – 11:00 "M3", a weight-management solution that can be used either as a stand-alone product or connected to any PLM software already implemented in the customer IS.
Mr. Marc de Laet, CEO - CS Communication and Systems India


11:30 – 12:00 Best practices: sending your employees to work in India/ in Europe – Basic information on immigration, tax and social
Ms. Elisa Khetty, India Country Manager - HELMA SOLUTIONS

To get the full details for all the presentations click here

For a list of SPRING Technologies Events click here

Tuesday, November 4, 2014

When Prototyping and Production Collide Simulation Breaks the Bottleneck


A great article in The Magazine for Western Metalworking Manufacturing written by Sean Buur


Cascade Corporation employs machine simulation to optimize production and prototyping manufacturing streams on the same machining centers.

Advanced CNC machine simulation software is helping a leading Portland, Oregon manufacturer of hydraulically operated fork lift truck accessories keep pace with aggressive schedules for prototyping and production manufacturing of hydraulic valve bodies on the same machining centers. The software (NCSIMUL from SPRING Technologies) makes it unnecessary to spend valuable on-machine hours single-stepping through first piece CNC programs to ensure that they will run without encountering interferences. As a result, prototype work rarely interferes with production manufacturing and design engineers get their prototype parts faster.

Cascade Corporation’s innovative material handling solutions enable lift trucks to become more versatile and efficient material handling tools. They rely on intricate hydraulic valve designs that make it possible to pull, push, clamp, lift, side-shift and rotate practically any unit load imaginable. These products are made and shipped to Europe, Asia and many other parts of the world from its manufacturing facility in Portland, Oregon.

Prototypes for hydraulic valve bodies critical to the success of the next generation of Cascade products are also made in the same plant and on the same manufacturing equipment as the full production components. Manufacturing prototypes on the same equipment allows the company to transition swiftly and smoothly into production manufacturing when a new design is released. It also means that prototype manufacturing must be conducted in off hours so that it does not disrupt very active production manufacturing schedules.

For the rest of the article go to: http://www.cnc-west.com/When_Prototyping_2.html